Orthopedic devices for penis enlargement have been used by men for more than a decade and have proven themselves to be positive. The most widely used device is called an extender, which is translated from English as an expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, which allows men to use both a purchased (factory) and homemade extender. It's pretty easy to make. The main thing is to have the necessary materials and basic knowledge regarding the mechanics of the intimate apparatus.
Types and effect of extenders
The device functions on the principle of proliferation of cavernous bodies. This occurs under the condition of regular tension of the tissues due to periodic unwinding of the axes in the direction of increasing length. The growth of new tissues does not stop; cells divide under the constant influence of distraction force.
Average growth rates, according to reviews from users and the manufacturer, are an increase in length of 2-5 centimeters over a period of 6 to 10 months. You shouldn't expect instant results. It will take patience and regular use of the extender. Violation of this recommendation will result in failure to achieve the desired effect.
Depending on the method of attachment, extenders are divided into several types. When planning to assemble a home version, you need to understand how they differ from each other.
Vacuum extender
The girth is carried out using a special vacuum chamber. It covers the head of the penis by approximately 3-7 centimeters in circumference. It is considered the most reliable and safe. The risk of injury is practically reduced to zero, since there is no risk of compression.
Extender for penis enlargement
Loop and strap extender
The mechanics of fastening are almost the same, but the shape of the fastening is different. In the first case, a loop is used, and in the second, a strap is used. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the contrary, can strongly compress the head, disrupting the blood supply to the reproductive organ, but remains the most common option.
How to make an extender with your own hands at home?
You can make any of the listed three types of apparatus. The most difficult one to manufacture will be the vacuum one due to the fact that you will have to make a chamber. Otherwise, the process will not have any significant differences.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design from any well-known manufacturer. Based on a photograph, drawing, video, they sketch their sketch. The length of the side posts is selected based on the desired result. It can vary from 20 to 25 centimeters.
Required materials and tools
A homemade extender at home is assembled from the same parts as the factory one. Specific materials depend on what kind of structure is being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made from thick cardboard, hypoallergenic plastic/plastic without sharp corners. Its internal diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use, which is changed every time.
- The slats (side rods) are selected so that they can fix the required length for a long time. These can be dies, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, then such a homemade product will not work.
The difference between the devices lies in the fastening element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle as written in some sources, but to purchase a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade extender
Step-by-step assembly instructions
Manufacturing a strap or loop device involves performing the following sequence of work:
- A piece with a diameter of 11 cm is cut out of a piece of plywood or other material no more than 10 mm thick. A hole with a circumference of at least 5. 5 cm is made inside. Other dimensions are determined by the cross-section of the penis.
- The length of the rods is 20-30 cm. They are completely screwed into the plywood, leaving a little on top. The places of entry are filled with glue.
- They screw a "lamb" onto each one.
- Strips are cut out of a thin metal plate and holes are made in them.
- A clamp made of soft tubes or a strap, which can be used as medical wide tourniquets, is inserted into the holes.
- Check the reliability of fixation.
The assembly of the vacuum variety differs only in that a jar with a pear is attached to the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius ranges from 13 to 25 mm. It is selected according to the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made from elastic surgical gloves.
The air will be pumped out thanks to a bulb or a connector with a hose. You can use the tonometer element. The shut-off valve is unscrewed from it and inserted from the other end. This allows you to change the operating principle. The pear will begin to pump out rather than pump air. As you can see, you will have to tinker more than with a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help, which clearly shows how the elements are connected, as well as what materials they are made from.
Extender for penis enlargement - tied under the knee
How and when to use?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. A man decides for himself whether he is satisfied with his reproductive organ or whether he wants to have more. To increase the size of the phallus, you need to wear a home-made or factory-made device for at least 4-6 hours a day. The design allows you to hide the extender under clothing. People around you won't notice anything.
Instructions for using the stretcher:
- The circle is placed on a slightly erect penis. The ring should fit snugly against the pubic bone.
- The foreskin is retracted and a camera, loop or strap is secured to the glans. It is necessary to make sure that the blood flow has not been disrupted (no excessive pressure, changes in the shade of the integument).
- Adjust the length of the rods. There should be no painful sensation. The parameter is gradually increased, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
When possible, massage the penis hourly. This allows him to quickly adapt to loads. After the allotted amount of time, the device is removed and the flesh is kneaded using special intimate creams. The device is thoroughly disinfected each time and put into clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a home stretcher include the following parameters:
- the opportunity to try the stretcher without purchasing a device;
- relative cheapness;
- obtaining a design that fully corresponds to the parameters of the phallus.
There are actually very few advantages. There are more disadvantages. These include the inconvenience of the product, since it is quite difficult to independently assemble a model that will ideally twist, put on, take off, and not press anywhere and not slip off.
Which extender is better - factory or homemade?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods each time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is usually less effective than homemade ones with a loop and strap.
- Cost, which was cited as an advantage, is a relative advantage. Today there are Chinese models, costing 1-3 thousand rubles. This is no more expensive than a homemade extender. No one will sell half a meter of hairpins or 20 centimeters of textolite. You will have to buy a lot more material that will lie idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, since it will be inconvenient to use. You have to spend a lot of time putting on and taking off, and taking into account the fact that self-massage is periodically recommended, it is also less effective.
One conclusion can be drawn - the factory device is better. To try this method of penis enlargement, you can simply buy an inexpensive model
What risks might there be when using a homemade device?
Experts and experts do not recommend assembling an extender yourself without the appropriate skills. If the device turns out to be "clumsy", presses, presses, causes discomfort, wearing it is highly not recommended. This can lead to unpleasant consequences.
Homemade extender
A well-assembled device will not be inferior in efficiency to a factory one. It will only be aesthetically unattractive. Otherwise there will be no difference, but there is a nuance here too. Many users write that with prolonged use, hematomas, compactions, and irritations form on the dermis.
This may be caused by low quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave much to be desired and with prolonged contact negative consequences begin to appear.